Concrete Inspection Master Kit

A complete kit for testing per ASTM F2659 & ASTM F2170, featuring the Tramex CMEX II moisture meter and Tramex Hygro-i ® relative humidity probes. The Concrete Inspection Master Kit comes in a protective heavy-duty carrying case with die-cut foam lining.


Kits Include:

  • CMEX II Digital, concrete moisture meter.
  • 12 Hygro-i ® RH probes for testing to ASTM F2170.
  • Hygro-i ® Electronic Interface Cable
  • 25 Hole liners for testing to ASTM F2170.
  • 3 Calibration check salts for RH probes.
  • IRTX Infrared surface thermometer.
  • Heavy-duty carry case.




Out of stock



  • Instant, non-destructive concrete moisture content test from 0 – 6.9% with CMEX II to ASTM F2659.
  • Fastest, most reliable Hygro-i ® RH probe for testing to ASTM F2170.
  • Perform multiple tests simultaniously.
  • Re-usable Hygro-i ® Relative Humidity probes prove to be the lowest cost per ASTM F2170.
  • Test ambient site conditions of Temperature, RH, Dew Point & Mixing Ratio.
  • Backlit display for ease of reading in low level lighting.
  • Check calibration of RH probes as often as required by standards.
  • Instant surface temperature readings to avoid condensation.



Weight: 8.1lbs (3.65kg)
Size 16.9″ x 13.6″ x 5.1″ (430mm x 345mm x 130mm)
Power 9 Volt PP3 Battery x 2 (included)
Depth of penetration NDT CMEX II approx. 3⁄4″ (20 mm)
Measuring Range
Moisture content of concrete 0 to 6.9 % (moisture by weight)
Gypsum Scale 0 to 10 (comparative)
Reference Scale 0 to 100 (comparative)
Relative Humidity 0 to 99%







All Tramex products are built with highest quality components, calibrated by hand, to exceed best industry standard and to give the user many years of service.

Tramex supplies a full one year guarantee against defects in parts & workmanship.

Additional information

Weight 8.5 lbs